Module PCI-104 1 cổng CAN ICP DAS PCM-CM100-D CR

Chia sẻ:
Mã sản phẩm: PCM-CM100-D
Thương hiệu: ICP DAS
Tình trạng:

1-port CAN Programmable PCI-104 Module

Liên hệ
Mô tả

Module PCI-104 1 cổng CAN ICP DAS PCM-CM100-D CR

Features

  • PCI-104 compliant
  • Compatible with CAN specification 2.0 part A and B
  • Fully compatible with the ISO 11898-2 standard
  • Support several kinds of baud rate from 10 kbps ~ 1 Mbps
  • 2500 Vrms photocoupler isolation on the CAN side
  • Built-in jumper for 120 Ω terminal resistor of CAN bus
  • 3 kV galvanic isolation
  • 80186, 80MHz CPU inside
  • Allow users to program their special firmware
  • Timestamp with at least ±1ms precision

Introduction

The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suited for networking "intelligent" devices as well as sensors and actuators within a system or sub-system. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted.

ICP DAS provides an open architecture platform for PCM-CM100-D. The PCM-CM100-D represents a very powerful and economic solution of an active CAN board with one CAN channels, covering a wide range of CAN applications. The 16-bit on-board microcontroller allows, among many other features, the filtering, preprocessing, and storage (with timestamp) of CAN messages as well as the real-time transmission of CAN messages. PCM-CM100-D also uses the new Phillips SJA1000T and Transceiver 82C250/251, which provide bus arbitration and error detection with auto correction and re-transmission function. Under the effect of the powerful microcontroller, this card can be made for one CAN controller without losing data, even in systems with a high bus load. Besides, equipped with integrated intelligence functions, the PCM-CM100-D makes it is possible to preprocess CAN data streams, thus relieving the PC of a considerable burden. As a result, real-time requirements on the PC applications are drastically reduced. Due to the state-of-the-art, it can be installed in a PCI-104 bus and supported truly “Plug & play” technology.

In addition, users can develop their own CAN application by using the PCM-CM100-D library. When the PCM-CM100-D is active, the data exchange between users’ application and can bus firmware is performed via the memory mapping method of the PCM-CM100-D.

Applications

  • DeviceNet, CANopen, CAN J1939, SDS (System Wide Network) protocol application.
  • CAN bus communication application. .
  • Industry automation
  • Industrial Machinery
  • Building Automation
  • Food & Beverage
  • Semiconductor Fabrication
  • Control system

Click to view the Introduction of https://mctt.vn/can-bus-icp-das

Specifications

Software
Driver Windows XP/7/8/10 (32-bit/64-bit OS)
SDK VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0
CPU Module
CPU 80186, 80 MHz or compatible
EEPROM 16 KB
Flash 512 KB
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
SRAM 512 KB
Real Time Clock Yes
LED Indicators
Status 1 x CAN status
1 x Operating mode
PC Bus
Type PCI-104
Board No. By DIP switch
CAN
Controller NXP SJA1000T with 16 MHz clock
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Power
Consumption 400 mA @ 5 V
Mechanical
Dimensions (mm) 96 x 90( W x L)
Environment
Operating Temperature 0 ~ +60 °C
Storage Temperature -20 ~ +70 °C
Humidity 5 ~ 85% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

PCM-CM100-D     CR  1-port Programmable CAN PCI-104 Module with 9-Pin D-sub Connector (RoHS)
Đăng nhập
Đăng ký
Hotline: 0904251826
x