| |
 |
| Model: ZT-2060 |
|
|
 |
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
- Wireless Transmission Range up to 700 m (Default)
- Adjustable RF Transmission Output Power
- GUI Configuration Software (Windows Version)
- Supports AES-128 Encryption for the Wireless Communication (Passive)
- Supports ZigBee Repeater Function
- 6 Digital Input Channels and 4 Relay Output Channels
- All Channels Can Be Used As 16-bit Counters
- ESD and Surge Protection
- Configurable Power-on Value and Safe Value Settings
- DIN-Rail Mountable
|
|
|
| |
 |
|
The ZT-2060 offers 4 Form A power relay output channels and 6 digital input channels, each of which features photocouple isolation. In addition, you can choose sink-type or source-type input via wire connections. Digital input channels are able to be used as 16-bit counters and Relay channels are options for configuring power-on and safe digital output values The ZT-2060 has 10 LED indicators to display the channel status, and has 4 kV ESD protection and 3000 VDC intra-module isolation. Users can easily configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.
|
| |
 |
| Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment. |
 |
| |
 |
| Digital Input |
| Input Channels |
6 |
| Types |
Wet Contact (Sink/Source) |
| On Voltage Level |
+3.5 VDC ~ +30 VDC |
| Off Voltage Level |
+1 VDC Max. |
| Input Impedance |
3 kΩ, 0.33 W |
| Counter |
Channels |
6 |
| Max. Count |
16-bit (65535) |
| Max. Input Frequency |
100 Hz |
| Min. Pulse Width |
5 ms |
| Relay Output |
| Output Channels |
4 |
| Types |
Power Relay, Form A (SPST N.O) |
| Operating Voltage Range |
250 VAC or 30 VDC |
| Max. Load Current |
5 A |
| Operate Time |
10 ms |
| Release Time |
5 ms |
| Mechanical Endurance |
2 x 107 ops at no load (300 ops/minute) |
| Electrical Endurance |
105 ops |
| Surge Strength |
3000 VDC |
| Power-on Value |
Yes, Programmable |
| Safe Value |
Yes, Programmable |
|
| |
 |
| Communication Interface |
| Wireless Standards |
ZigBee 2007 Pro |
| Transmission Power |
11 dBm (FCC Certificated) |
| 2.4 GHz Antenna |
5 dBi Omni directional |
| Transmission Range (LoS) |
700 m (Typical) |
| Certification |
CE/FCC, FCC ID |
| Max. Slaves in a ZigBee Network |
255 |
| Protocols |
Supports DCON and Modbus RTU Protocols |
| Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
| Hot Swap |
Rotary and DIP switch |
| LED Indicators |
| Power |
1 LED, Red |
| ZigBee Communication |
1 LED, Green |
| Digital Input and Output |
6 Green LEDs for Digital Input
4 Red LEDs for Relay Output |
| Isolation |
Intra-module Isolated,
Field-to-Logic |
2500 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for Power Line, Communication Line
and each Channel, 8 kV Air for Random Point |
| EFT (IEC 61000-4-4) |
4 kV for Power Line |
| Surge (IEC 61000-4-5) |
3 kv for Power Line |
| Power |
| Input Voltage Range |
+10 VDC ~ +30 VDC |
| Power Consumption |
1.4 W Max. |
| Mechanical |
| Flammability |
Fire Retardant Materials (UL94-V0 Level) |
| Dimensions (L x W x H) |
94 mm x 33 mm x 110 mm |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-25 ~ +75°C |
| Storage Temperature |
-30 ~ +80°C |
| Relative Humidity |
10 ~ 90% RH, Non-condensing |
|
| |
 |
| ZT-2060 CR |
Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module (RoHS) |
| Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550 or ZT-2570 ZigBee host converter when you purchase ZigBee Data Acquisition Products. |
|
| |
 |
| MDR-20-24 |
24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting |
| ZT-2510 CR |
ZigBee Repeater (RoHS) |
| ZT-2550 CR |
RS-485/RS-232 to ZigBee Converter (Host) |
| ZT-2570 CR |
Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (RoHS) |
|
|
VN / Vietnammese
EN / English
